VXL GO Starter Kit
Get Started
With Our Budget Starter Kit
Our Starter kit VXL GO contains everything you need to print and dissolve VXL support materials. The perfect solution for a maker like yourself.
How does it work?
What’s Inside
Dissolving VXL can be done even with household items. Inside the bundle, you will find
a 10 liter plastic container, a stirring rod with a heater, and a number of accessories.
Dissolve Your Supports
in 5 Simple Steps
Add Water and Washing Powder
Add tap water and the whole sachet of VXL solve washing powder.
Place Your Part
Place your 3d printed part with support structures inside the container using the supplied tonges.
Set Temperature
Set dissolving temperature up to 60°C depending on the model material and support material you use.
Supports Will Dissolve
Depending on the complexity of your supports it will take from a half-hour to a few hours to dissolve all support structures.
Rinse Your Part
Remove your part and rinse off any remains of the washing liquid with tap water. Congratulations, your part is ready!
Technical Specifications
| Container Dimensions | 380 x 240 x 210 mm |
| Tank Capacity | 10 liters |
| Weight | without fluid: 2 kg with fluid: approx. 12 kg |
| Adjustable Temperature Range | 25 °C – 60 °C |
| Temperature Adjustment | in 0.1 °C |
| Heating Time (10L, 20°C – 60 °C) | Approx. 25 minutes |
| Recommended Model Materials Verify temperature settings with a temperature resistance of your model materials | No restrictions |
| Recommended Support Materials | VXL 70, VXL 90 |
| Maximum Power Consumption The peak power consumption of the VXL GO during heating up. | 850 W |
| Power Supply | AC 230V/50Hz EU-Plug |
| Dissolving Technique | Continous fluid agitation and heat |
| Maintenance Interval | After draining solution, on demand |
| CE – Conformity | EU |
| Warranty | 6 months |
Any Questions? Try our Help Center!
Download 3D models
Need More Power?
