ALL IN ONE
Purchasing a professional dissolving station is not always an option, especially for home users. Generally, simpler methods can also be sufficient for post-processing. With our VXL GO Starter Kit, you can easily remove support material from your printed part without having to dig deep into your pocket. Support your model with the enclosed Xioneer VXL 70 or VXL 90 filament and then dissolve it again with our simple starter kit. Simple means to a professional result.
EXTENSIVE STARTER-KIT
This kit includes everything you need to get started with postprocessing.
1 x 100 g Filament Spool of Xioneer VXL 70 or VXL 90 with 1.75 or 2.85 mm in diameter
1 x Plastic Container 10 Liters
1 x Hot Stirring Rod
1 x Pump
1 x Tong
1 x Safety Goggles
1 x Pair of Gloves
1 x VXL solve Dissolving Powder.
MORE FREEDOM, FEWER LIMITS
Even with our starter kit, doors are opened to far greater degrees of freedom in 3D printing. Problematic geometries in your model no longer have to be a limitation for creativity and function. Our VXL 70 as well as VXL 90 filaments already offer you the possibility to support a wide range of conventional model materials, including ABS, PETG or TPU. More information, for example on the compatibility of different material combinations, can be found in addition to the following table under the heading “VXL support materials”.
| Bundle with VXL 70 | Bundle with VXL 90 | |
| Extruder | 200 – 220 °C | 220 – 240 °C |
| Bed | 50 – 70 °C | 70 – 90 °C |
| Build Chamber | Up to 60 °C | Up to 80 °C |
| Dissolution | min. 40 °C | min. 55 °C |
| Compatible Materials | ABS, ASA, HIPS, PA, PCTG, PETG, PVB, TPC, TPU |
ABS, ASA, HIPS, PA, PCTG, PETG, PVB, TPC, TPU, PET |