Vortex EZ Support Removal Station

Affordable Device
to Dissolve Your Supports

Vortex EZ is our easy-to-use affordable desktop support removal station. It will easily fit in your office, workshop, lab, school, and production floor.

How does it work?

Explore Features

Easy to Use,
Powerful in Action

Large 450 x 260 x 205 mm basket and a powerful heater for large 3D printed parts and safe,
plug-and-play operation

Dissolve Your Supports
in 5 Simple Steps

Fill Water and Washing Powder

Add tap water and a few spoons of our safe and non-toxic VXL EX washing powder.

Learn About VXL EX

Place Your Part

Place your 3d printed part with support structures inside the basket.

Check Tech Specs for Part Sizes

Set Temperature

Set dissolving temperature up to 85°C depending on the model material and support material you use.

Compare VXL

Supports Will Dissolve

Depending on the complexity of your supports it will take from a half-hour to a few hours to dissolve all support structures.

Compare VXL

Rinse Your Part

Remove your part and rinse off any remains of the washing liquid with tap water. Congratulations, your part is ready!

Order now!

Order now

Technical Specifications

Outside Dimensions (LxWxH)	640 x 370 x 450 mm
Basket Dimension / Maximum Part Size (LxWxH)	450 x 260 x 205 mm
Tank Solvent Capacity	11 – 38 Liter
Net Weight Without Solvent	22 kg
Adjustable Temperature Range	30 °C – 85 °C
Heat-up Time (38L, 20°C – 70 °C)	Approx. 2,5 hours
Recommended Model Materials Verify temperature settings with a temperature resistance of your model material	No restrictions
Recommended Support Materials	VXL (All Types), PVA, BVOH

Peak Power Consumption The peak power consumption of the Vortex EZ during heating up.	1220 W (110V/60Hz) 1360 W (230V/50Hz)
Average Power Consumption at 85 °CAverage power consumption with a full tank to maintain the set temperature once heated up.	Approx. 250 W
Power Supply	AC 230V/50Hz EU Version, AC 110V/60Hz US Version
Dissolving Technique	Continous fluid agitation and heat