The adhesion between the support, model and print bed depends on several factors. If the nozzle and/or bed temperature is too low, the print speed in the interface is too high or the Z-offset is too large, the adhesion can become too weak, resulting in detachment between the support, model and/or print bed. Especially on a printer with two print heads, the Z-offset must be set correctly for both print heads. If the adhesion is too weak, the nozzle and/or bed temperature can be increased, the printing speed in the interface reduced or the Z offset lowered. When changing the Z offset, just a few 1/100 mm can be sufficient.

Shopping Cart
Scroll to Top