VXL GO Starter Kit

105,91 

Xioneer VXL GO Starter Kit – Dissolve 3D-Printing Soluble Support Materials – Comes with VXL 70 or 90 filament spool (1.75 or 2.85 mm), Plastic Container (10 liters), Hot Stirring Rod, Pump, Thong, Safety Goggles, Gloves, Xioneer VXL solve Dissolving Powder

105,91 

Filament spool
This option is required
VXL 70 VXL 90
Diameter
This option is required
1.75 mm 2.85 mm
Clear selection
SKU: 4260459998051 Category:

ALL IN ONE

Purchasing a professional solving station is not always an option, especially for home users. Generally, simpler methods can also be sufficient for post-processing. With our VXL GO Starter Kit, you can easily remove support material from your printed part without having to dig deep into your pocket. Support your model with the enclosed Xioneer VXL 70 or VXL 90 filament and then dissolve it again with our simple starter kit. Simple means to a professional result.

EXTENSIVE STARTER-KIT

This kit includes everything you need to get started with prostprocessing.

1 x 100 g Filament Spool of Xioneer VXL 70 or VXL 90 with 1.75 or 2.85 mm in diameter
1 x Plastic Container 10 Liters
1 x Hot Stirring Rod
1 x Pump
1 x Tong
1 x Safety Goggles
1 x Pair of Gloves
1 x VXL solve Dissolving Powder.

MORE FREEDOM, FEWER LIMITS

Even with our starter kit, doors are opened to far greater degrees of freedom in 3D printing. Problematic geometries in your model no longer have to be a limitation for creativity and function. Our VXL 70 as well as VXL 90 filaments already offer you the possibility to support a wide range of conventional model materials, including ABS, PETG or TPU. More information, for example on the compatibility of different material combinations, can be found in addition to the following table under the heading “VXL support materials”.

  Bundle with VXL 70 Bundle with VXL 90
Extruder 200 – 220 °C 220 – 240 °C
Bed 50 – 70 °C 70 – 90 °C
Build Chamber Up to 60 °C Up to 80 °C
Dissolution min. 40 °C min. 55 °C
Compatible Materials ABS, ASA, HIPS, PA, PCTG,
PETG, PVB, TPC, TPU
ABS, ASA, HIPS, PA, PCTG,
PETG, PVB, TPC, TPU, PET
     
     
     
     
     

How to use VXL GO Starter Kit? Fill the 10 liters plastic container with tap water up to the “Fill Level” mark. Add the VXL solve detergent to the water. Place your model in the container with the help of a tong (Included in the package). Close the container and put the hot stirring rod through the lid, then set the time and temperature. Countdown will start once the set temperature is reached, for example 40 °C (Please note that the water inside the container should not be heated up to more than 60 °C). You will know that time is up when the device. Now carefully remove the lid, hold your part with a tong and rinse it with tap water. Now use the siphon pump to empty the container.

Container Dimensions

380 x 240 x 210 mm

Tank Capacity

10 L

Weight

without fluid: 2 kg, with fluid: approx. 12 kg

Adjustable Temperature Range

25 °C – 60 °C

Heat-up Time (38 L, 20 °C – 70 °C)

Approx. 25 minutes

Maximum Power Consumption

850 W

Power Supply

AC 230 V/50 Hz EU-Plug

Dissolving Technique

Continuous fluid agitation and heat

Maintenance Interval

After draining solution, on demand

CE – Conformity

EU

Shopping Cart
Scroll to Top