label product

BVOH

53,55 

Xioneer 3D Printer filament – Xioneer BVOH – Water Soluble Support Material 1,75mm – Compatible with ABS, ASA, PLA, PET, PA, PC and TPU – 500g Spool

* Available at the latest on 14 October

SKU: 4260459991977 Category:

Recommended temperature for heated bed is ≥60 °C. Do not exceed a printing temperature of 230 °C for a prolonged period. BVOH works with most of the common adhesives. The speed at which the product dissolves in water is dependent on the volume of the printed object, the amount and the temperature of the water. Higher water temperature (up to 70 °C is no problem) will accelerate the dissolution. Keep in account that the temperature of the water is based on the properties of the material that you are printing with BVOH to avoid warping issues (example, if you print PLA with BVOH, keep the water around 40°C). The BVOH/water solution can be disposed through the household drain with an excess of water. BVOH can be used on most Dual printing desktop FDM or FFF technology 3D printers. Storage: Cool and dry (15-25 °C) and away from UV light. This enhances the shelf life significantly. If you remove the spool out of the vacuum bag packaging and you do not store it in a place with low moisture content, we advise you to properly dry the material before printing to avoid any quality issue.

Physical properties: Density (21.5 °C): 1.14 g/cm3 Melt flow index (MFI) at 190°C, 21.6 kg: 6-9 g/10 min Printing temperature: 220±10 °C Melting temperature: 176 °C Vicat softening temperature: 63.1 °C

Diameter

1.75 mm

Printing material

ABS, ASA, PA, PC, PET, PLA, TPU

Weight

500 g

Material

Butenediol-vinylalcohol-copolymer

Colour

Natural

Transparency

Opaque

Core hole diameter of the coil

52 mm

Diameter tolerance

±0.05 mm

Circularity tolerance (max.)

±5 %

Solubility in water

Yes

Shopping Cart
Scroll to Top