EasyWash EW1 Support Removal Station

Affordable Device
to Dissolve Your Supports


EasyWash EW1 is our easy-to-use affordable desktop support removal station. It will easily fit in your office, workshop, lab, school, and production floor.

How does it work?

Easy to Use,
Powerful in Action

Large 465 x 275 x 210 mm basket and a powerful heater for large 3D printed parts and safe,
plug-and-play operation

Dissolve Your Supports
in 5 Simple Steps


Fill Water and Washing Powder

Add tap water and a few spoons of our safe and non-toxic VXL-EX washing powder.

Place Your Part

Place your 3d printed part with support structures inside the basket.

Set Temperature

Set dissolving temperature up to 85°C depending on the model material and support material you use.

Supports Will Dissolve

Depending on the complexity of your supports it will take from a half-hour to a few hours to dissolve all support structures.

Rinse Your Part

Remove your part and rinse off any remains of the washing liquid with tap water. Congratulations, your part is ready!

Coming Soon!

Sign-up to be the first to know when EasyWash EW1 becomes avilable.

Technical Specifications

Outside Dimensions 585 x 405 x 420 mm
Basket Dimension / Maximum Part Size465 x 275 x 210 mm
Tank Solvent Capacity11 – 36 Liter
Net Weight Without Solvent14 kg
Adjustable Temperature Range 30 °C – 85 °C
Heat-up Time (36L, 20°C – 70 °C) Approx. 1 hour
Recommended Model Materials Verify temperature settings with a temperature resistance of your model material No restrictions
Recommended Support Materials VXL (All Types)
Peak Power Consumption The peak power consumption of the EasyWash EW1 during heating up.2460 W
Average Power Consumption at 85 °CAverage power consumption with a full tank to maintain the set temperature once heated up.
Approx. 250 W
Power SupplyAC 230V/50Hz EU-Plug
Dissolving TechniqueContinous fluid agitation and heat
Maintenance IntervalOn demand
CE – ConformityEU
Warranty6 months excluding accessories and consumables

Any Questions? Try our Help Center!

Dissolve VXL
With Our Eco-Friendly Detergent

VXL-EX is an affordable, safe, and non-caustic washing powder developed specifically to dissolve VXL. Learn more about using VXL-EX.

Want to Try VXL Support Material?

VXL-Go Starter Kit

Ready to Try VXL? Our all-inclusive VXL-Go bundle will get you started in no time. It has a simple support removal station, a 100g spool of either VXL 70 or VXL 90 with a solvent, and a number of accessories to get you off the ground.

Buy on Amazon >

Explore our Digital Magazine and Help Center

Scroll to Top